Crosstalk • Crosstalk • Near-End Crosstalk (NEXT) • One of the most important cable measurements is Near-End Crosstalk (NEXT). It’s signal interference from one pair that adversely affects another pair on the same end. Crosstalk occurs between...

DisplayPort - a digital interface standard to connect a computer with a display • DisplayPort - a digital interface standard • DisplayPort is a digital interface standard whose primary use is to connect a computer with a display or a high defi...

...including existing cables and the Mini DisplayPort connector. DisplayPort v1.2 increases performance by doubling the maximum data transfer rate from 10.8 Gbps to 21.6 Gbps, greatly increasing display resolution, color depths, refresh rates, and...

...connecting IEEE-488 cables, some rules apply. The total number of devices should be 15 or less. The total length of all cables should not exceed 2 metres multiplied by the number of connected devices, up to a maximum of 20 metres. And no more th...

...ports. Designed to consolidate the cable clutter associated with multiple peripherals and ports, USB supports all types of computer- and telephone-related devices. • USB detects and configures the new devices instantly • Before the arrival of Univ...

...money. • Computer cables can only be too short, but never too long. The same applies to networking cables. Sometimes it is just the last meter that is missing, but in many cases some kilometres are missing. A standard 10/100 or 10/100/1000 Cop...

...pairs carry colour and synchronisation signals (one colour pair). Cables rated higher than CAT5 don’t have equal pair lengths to fulfill their intended Ethernet specifications, so the colour signals arrive at a different time at the remote end. •  

...greater than copper cables?. Its small size makes it easier to handle, and it takes up much less space in cabling ducts. Although fibre is still more difficult to terminate than copper is, advancements in connectors are making termination easier...