Billedet kan afvige fra det aktuelle produkt
|
|
|
| |
|
|
Tilbehør
Futher Highlights
- Easy installation and transparent operation—no software required.
- Autonegotiates for speed to achieve the best possible mode of operation.
- UTP port supports full- and half-duplex operation.
- To prevent congestion, supports automatic and manual pause function for flow control.
- Supports jumbo frames up to 10,240 bytes.
- Loopback mode supports end-to-end testing.
- Manual switches give you the option to control port operation.
- Can also be used in the FlexPoint 14-Slot Power Chassis or the FlexPoint 5-Position Rackmount Kit.
Product Details
There are many media converters for Gigabit. But this one is different enabling you in addition to track your links. You will instantly know if your fibre links fails or your copper link goes down.
Flexible SFP Technology
The media converter features a RJ45 Port that connects to 10-, 100-, or 1000-Mbps Ethernet on the copper side. Through the SFP slot a variety of fibre topologies can be connected or easily adapted depending on what you require for fiber type, speed, and distance. The media converter supports duplex and single-fiber 155- and 1250-Mbps SFPs for standard communications as well as CWDM wavelengths for increased fiber bandwidth capacity.
Troubleshooting
For easy installation and troubleshooting, LEDs indicate the availability of power, port activity and link status, and duplex mode. Remote fault indicators signal loss of link for far-end fault and link fault conditions. Detection of these indicators or link modes can be propagated to the other port to notify connected end devices of faults.
Mounting and Consolidation
Like all MFP converters, the LMC1017AE can be used as a standalone converter, mounted on a wall or DIN-rail using the corresponding mounting kits. When your LAN grows, mount your MFP converters in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC or DC power supplies.
Features —Fibre Alert, Far End Fault, LinkLoss automatic or manul speed configuration
Connectors — (1) RJ-45 10-/100-/1000-Mbps, (1)SFP Slot
Power — 230-VAC, 50-Hz, external power supply or from optional MFP Power Chassis; 9 watts maximum
Size — 2,5H x 7,6W x 10,2D cm (1"H x 3"W x 4"D)
Humidity — 5 to 90% non condensing
Temperature — Operating: 0 to +50° C
Weight— 0.2 kg (0.4 lb.)
|
Indkøbsvogn
Log ind
Kontakt os
